Singly reinforced beams – Civil Engineering Projects

Singly reinforced beams | Building Construction

For design of “Singly reinforced beam” article series, we have covered the following:

Now we will move on with another solved example where we will calculate the Moment of resistance and determine the position of the Neutral axis. For this we will have to use the formulas that we have derived earlier in our previous articles in the list above.

Numerical Problem

Calculate the moment of resistance of an RC beam 250x550mm overall. Reinforcement is 1521mm2 and is placed at a distance of 25mm from the bottom.

(σ_cbc = 7N/mm2, σst = 140N/mm2, m = 13.33)

Given that:

b = breadth of a rectangular beam = 250mm

d = effective depth of a beam = 550 – 25 = 525mm

x = depth of neutral axis below the compression edge = ?

A_st = cross-sectional area of steel in tension = 1531mm2

σ_cbc = permissible compressive stress in concrete in bending = 7N/mm²

σ_st = permissible stress in steel = 140 N/mm²

m = modular ratio = 13.33

We have to find the value for Moment of resistance. To calculate Mr, we have to first calculate NA(critical) and NA (actual).

To find Neutral axis (NA) (critical):

σ_cbc /(σ_st/m) = x_c/(d – x_c)

7/(140/13.33) = x_c/(500 – x_c)

x_c = 209.969mm = 210mm

Moment of Resistance | Guide to design of Singly reinforced Sections

For the design of Singly reinforced Sections article series, we have covered the following:

Now we will move on with our discussion on “Moment of resistance” and derive the formula for Moment of resistance for balanced section, under-reinforced section and over reinforced section.

The moment of resistance of the concrete section is the moment of couple formed by the total tensile force (T) in the steel acting at the centre of gravity of reinforcement and the total compressive force (C) in the concrete acting at the centre of gravity (c.g.) of the compressive stress diagram. The moment of resistance is denoted by M.

The distance between the resultant compressive force (C) and tensile force (T) is called the lever arm, and is denoted by z.

Moment of resistance | Singly reinforced Section

From the diagram above, it is clear that the intensity of compressive stress varies from maximum at the top to zero at the neutral axis.

Therefore, centre of gravity of the compressive force is at a distance x/3 from the top edge of the section.

Therefore, z = d-x/3

Guide to design of Singly reinforced beams | Solved examples